PIPING FOOT Genuine Husvarna Viking 1 thru (7)

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

PIPING FOOT Genuine Husvarna Viking 1 thru (7):
$27.89

emptyPiping Foot

Genuine Husqvarna Viking

411 85 10-45

Insert packaged Piping into seams and edges for a tailored finish. Cover cord with fabric for specialty piping. Straight stitch, length 2.5.

1. Snap on the Piping Foot.
To stitch piping into a seam. 2. Place piping along seam line on right side of fabric. Place second piece of fabric on top with right sides together.
3. Put fabric and piping layers under Piping Foot with the piping in the groove on the underside of the foot. Sew. The groove on the underside of the foot will guide the piping as you sew. (Hint: Notch the seam allowance of the piping on curves and corners.)
To make piping from your fabric:
1. Cut Bias or crosswise grain strips, wide enough to cover the cording plus seam allowances.
2. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.
3. Place the fabric and cord under the Piping Foot with the cord in the groove on the underside of the foot.
4. Sew. The groove will guide the cord so the fabric covers it evenly. (Hint: When you sew this piping into a garment, adjust the needle position so it stitches one setting closer to the cord to cover the first style=\"color: rgb(0, 66, 154);\">For International purchases, import duties, VAT, taxes and charges are not included in item prices or shipping charges. These charges are the buyer\'s responsibility. Please check with your country\'s customs office to find what these charges will be before you buy. Thank you.