`SCARCE c1898 WALTHAM P S BARTLETT 18S 17J MOVEMENT, DIAL & HANDS.

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

`SCARCE c1898 WALTHAM P S BARTLETT 18S 17J MOVEMENT, DIAL & HANDS.:
$77.72

c1898 Waltham, Model 1883, Grade P S Bartlett, 18S, 17J lever set with date serial number 7539751 for c1898. Crown is located at 3, missing crown so can’t fully test, balance staff / wheel ok, nice double sunken dial, needs a clean but there is a very tiny loss at edge at 5, tiny crack between 3 & 4. The lever is located just past 5.

AMERICAN RAILROAD POCKET WATCHES.
HNCO is one of the leading sellers of Pocket watches on Australia, with over 100+ Pocket watches on offer. We are constantly adding to ever increasing range and have a large assortment of American Railroad Grade Pocket Watches.
American Railroad Pocket watcheswere amongst the highest grade watches made, having been made for the railways makes them a great choice to use every day, mainly for their durability over time.Their lower production quantities and of course their high grade movements make them also a great gift or investment.
A typical railroad\'s requirements for a pocket watch in the early 20th century might include:

Only open-faced dials, with the stem at 12 o’clock.
Minimum of 17 functional jewels in the movement.
Size 16 or 18 only.
Maximum variation of 30 seconds (approximately 4 seconds daily) per weekly check.
Watch adjusted to at least five positions: Face up and face down (the positions a watch might commonly take when laid on a flat surface); then crown up, crown pointing left, and crown pointing right (the positions a watch might commonly take in a pocket). Occasionally a sixth position, crown pointing down, would be included.
Adjusted for severe temperature variance and isochronism (variance in spring tension)
Indication of time with bold legible Arabic numerals, outer minute division, second dial, heavy hands.
Lever used to set the time (no risk of inadvertently setting the watch to an erroneous time, when winding the watch with the stem)
Breguet balance spring
Micrometer adjustment regulator
Double roller escapement
Steel escape wheel
Anti-magnetic protection (after the advent of diesel-electric locomotives)

The minimum requirements were raised several times as watch-making technology progressed, and the watch companies produced newer, even more reliable models. By WW2, many railroads required watches that were of a much higher grade (as many as 23 jewels, for example) than those made to comply with the original 1891 standard.
_gsrx_vers_634 (GS 6.9.8 (634))