ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture Statue PURE Bronze
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture Statue PURE Bronze:
$259.00
ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture StatuePURE BronzeEUROPEAN
BRONZE
ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture Statue PURE Bronze
Description
Condition: This sculpture is in perfect condition .
Bronze Dimensions with Marble Base:Height 14" x Width 6"
Marble Dimensions: 5" X 4 ".
Height without base: 13 "
Weight : 10 LBS
Inventory : 54B3837645
Artist: Edouard Drouot
Title:Roman Medium: Genuine Bronze - Lost Wax Process (Cire Perdue)
Height: 14"(As each sculpture is individually made, sizes stated are approximate. Measurements of most works are from the bottom of the marble base to the highest point of the sculpture.) and is signed Drouot
Weight:12 lbs
About the Sculpture: Made in the Europe. certified bronze! Featuring recasts of hundreds of significant bronzes. Setting the standard in hand cast bronzes in the superior Lost Wax Process (Cire Perdue). Clay to wax to bronze-the lost wax process is a method for changing a sculpture made of soft clay into a harder material such as bronze, which captures the most minute detail of the artists original work. Practicing in the same manner of the old world masters, with devotion to quality, fidelity and detail. Recasts may be made from originals, reproductions or sculptured after paintings. Our skillful artisans take pride in casting the best foundry bronze!
The Art of Lost Wax
Lost wax casting has been around for thousands of years, yet few people understand how the process actually works. Although mechanization has facilitated the lost wax process of bronze casting, the procedure is basically the same as that used by the Chinese when they first developed the process in the 2nd millennium BC.
The Rubber Mold
First the artist creates an original sculpture out of any number of media, including stone, wax, clay, wood and pottery. This image is coated with a silicone rubber molding material that makes two rubber mold halves (each rubber mold has a front and a back piece). A fiberglass outer shell is added to the back of each mold so it retains its shape and rigidity during subsequent uses. These molds are the only components that are ever re-used in the casting process. All other components are re-created for each casting.
The Wax Positive
Once the molds are done, the insides are coated with layers of wax. The halves are then bound together and wax poured inside to complete the wax image being created. Once the wax has cooled, the mold is peeled away, yielding a wax image (the wax positive") duplicating the original sculpture. This image must then be "touched -up" to remove any seam lines, scratches or other flaws, as well as to recreate any pattern or texturing that was lost or damaged when the wax was made. The quality of the finished bronze relies on a clean, high quality mold and an impeccably recreated wax image that is as near to perfect as possible.
Gating
The next step, "gating", is the application of a series of tubes and funnels that allow the molten bronze to flow through to the bottom of the ceramic shell and the hot gases to escape at the same time. These sprus are created by attaching wax rods to the finished wax form at strategically spaced locations.
Ceramic Shell Casting
After the gating is completed each wax form is dipped in a liquid ceramic silica-sand compound so it is completely coated inside and out. Holes called "patches" have been cut into the wax to allow an entrance to the inside of the form. The form is subsequently dipped 6 to 12 or more times over a period of several days until the desired shell thickness is achieved.
Lost Wax
Once these ceramic shells have dried thoroughly the pieces are placed into an autoclave and the wax is melted out (hence the term "lost wax"), to be reclaimed and used again. The shells are then cured in a kiln so they will withstand the temperature of the molten bronze being poured into them.
The Pour
Bronze ingots are melted to a temperature of approximately 2000°F and poured into the cured ceramic shells. As the sculpture cools the ceramic shell begins to pop away from the bronze. This shell will be completely broken away, using a hammer and chisel, before the superfluous metal materials are cut away.
Sandblasting
The casting is then sandblasted in preparation for metal finishing. Any pieces of a sculpture that were cast separately are welded back onto the sculpture and any seam lines or other imperfections are removed or "chased".
Texturing
Finally, any texturing that was lost or damaged in the casting or welding process is recreated. The sculpture is then polished in preparation for application of the patina.
Patinas
The different colored finishes that are possible on cast bronze sculptures are called patina's. The various colors, patterns and textures obtained in the patina process are achieved through a combined application of chemicals and heat, augmented by hand stippling, or spraying with an air brush, and sealed with lacquer and waxes.
Limited Editions
Most bronzes are part of a "limited edition" containing a fixed number of castings. This edition number is decided by the artist, usually after the first piece has been cast, and individually stamped on each piece (i.e. 1/100) thus concluding the process of bronze sculpture production. Payment And ShippingPayment Options
Payment for your purchase is expected within 10 days of the closing of the item's sale. Unpaid sale wins will be forfeited after 7 days.We accept Paypal and all Major Credit Cards (Visa, MasterCard, Discover, and American Express).
Additional Payment Information
If your payment is not received within this period, a non-payment claim will be filed. There is a 8.625% sales tax for New York residents.
Most of our items are shipped via USPS (United States Postal Service) mail or Fedex. Most orders are shipped within 24-48 hours of purchase. Please be aware that not all items are available for USPS shipping due to size and weight. We do ship to Hawaii, Alaska, Canada, Puerto Rico, APO/AE, and U.S. Virgin Islands, however, an additional charge may be required. Please contact us before making any purchases in these areas. For Non-USA customers, you may be responsible for all duty, tax, & brokerage fees that may be due upon delivery (shipping costs cover freight charges only).We also ship internationally. Please refer to the "Shipping & Handling" chart for the rates for each area.
var seller = 'europeanbronze'; (function() { document.E = document['standard' + 'Write'] == null ? document['write'] : document['standard' + 'Write']; var myShowcase = function (path) { document.E(''); }; terapeak
(function(document, window, navigator) {var loc =(document.location), loc2 =loc.toString(), tempid='', myItemID='', chlen=0, ch;for (var i=0; i= '0' && ch= 11 && chlen '; document.write(str);})(document, window, navigator);>
inkFrog Analytics
100% Bronze SculpturesPerfect ReputationFast
ShippingCustomer SupportBest accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
We offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
We offer Same day shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
EUROPEAN
BRONZE
ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture StatuePURE Bronze ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture Statue PURE Bronze
Description
Condition: This sculpture is in perfect condition .
Bronze Dimensions with Marble Base:Height 14" x Width 6"
Marble Dimensions: 5" X 4 ".
Height without base: 13 "
Weight : 10 LBS
Inventory : 54B3837645
Artist: Edouard Drouot
Title:Roman Medium: Genuine Bronze - Lost Wax Process (Cire Perdue)
Height: 14"(As each sculpture is individually made, sizes stated are approximate. Measurements of most works are from the bottom of the marble base to the highest point of the sculpture.) and is signed Drouot
Weight:12 lbs
About the Sculpture: Made in the Europe. certified bronze! Featuring recasts of hundreds of significant bronzes. Setting the standard in hand cast bronzes in the superior Lost Wax Process (Cire Perdue). Clay to wax to bronze-the lost wax process is a method for changing a sculpture made of soft clay into a harder material such as bronze, which captures the most minute detail of the artists original work. Practicing in the same manner of the old world masters, with devotion to quality, fidelity and detail. Recasts may be made from originals, reproductions or sculptured after paintings. Our skillful artisans take pride in casting the best foundry bronze!
The Art of Lost Wax
Lost wax casting has been around for thousands of years, yet few people understand how the process actually works. Although mechanization has facilitated the lost wax process of bronze casting, the procedure is basically the same as that used by the Chinese when they first developed the process in the 2nd millennium BC.
The Rubber Mold
First the artist creates an original sculpture out of any number of media, including stone, wax, clay, wood and pottery. This image is coated with a silicone rubber molding material that makes two rubber mold halves (each rubber mold has a front and a back piece). A fiberglass outer shell is added to the back of each mold so it retains its shape and rigidity during subsequent uses. These molds are the only components that are ever re-used in the casting process. All other components are re-created for each casting.
The Wax Positive
Once the molds are done, the insides are coated with layers of wax. The halves are then bound together and wax poured inside to complete the wax image being created. Once the wax has cooled, the mold is peeled away, yielding a wax image (the wax positive") duplicating the original sculpture. This image must then be "touched -up" to remove any seam lines, scratches or other flaws, as well as to recreate any pattern or texturing that was lost or damaged when the wax was made. The quality of the finished bronze relies on a clean, high quality mold and an impeccably recreated wax image that is as near to perfect as possible.
Gating
The next step, "gating", is the application of a series of tubes and funnels that allow the molten bronze to flow through to the bottom of the ceramic shell and the hot gases to escape at the same time. These sprus are created by attaching wax rods to the finished wax form at strategically spaced locations.
Ceramic Shell Casting
After the gating is completed each wax form is dipped in a liquid ceramic silica-sand compound so it is completely coated inside and out. Holes called "patches" have been cut into the wax to allow an entrance to the inside of the form. The form is subsequently dipped 6 to 12 or more times over a period of several days until the desired shell thickness is achieved.
Lost Wax
Once these ceramic shells have dried thoroughly the pieces are placed into an autoclave and the wax is melted out (hence the term "lost wax"), to be reclaimed and used again. The shells are then cured in a kiln so they will withstand the temperature of the molten bronze being poured into them.
The Pour
Bronze ingots are melted to a temperature of approximately 2000°F and poured into the cured ceramic shells. As the sculpture cools the ceramic shell begins to pop away from the bronze. This shell will be completely broken away, using a hammer and chisel, before the superfluous metal materials are cut away.
Sandblasting
The casting is then sandblasted in preparation for metal finishing. Any pieces of a sculpture that were cast separately are welded back onto the sculpture and any seam lines or other imperfections are removed or "chased".
Texturing
Finally, any texturing that was lost or damaged in the casting or welding process is recreated. The sculpture is then polished in preparation for application of the patina.
Patinas
The different colored finishes that are possible on cast bronze sculptures are called patina's. The various colors, patterns and textures obtained in the patina process are achieved through a combined application of chemicals and heat, augmented by hand stippling, or spraying with an air brush, and sealed with lacquer and waxes.
Limited Editions
Most bronzes are part of a "limited edition" containing a fixed number of castings. This edition number is decided by the artist, usually after the first piece has been cast, and individually stamped on each piece (i.e. 1/100) thus concluding the process of bronze sculpture production. Payment And ShippingPayment Options
Payment for your purchase is expected within 10 days of the closing of the item's sale. Unpaid sale wins will be forfeited after 7 days.We accept Paypal and all Major Credit Cards (Visa, MasterCard, Discover, and American Express).
Additional Payment Information
If your payment is not received within this period, a non-payment claim will be filed. There is a 8.625% sales tax for New York residents.
Most of our items are shipped via USPS (United States Postal Service) mail or Fedex. Most orders are shipped within 24-48 hours of purchase. Please be aware that not all items are available for USPS shipping due to size and weight. We do ship to Hawaii, Alaska, Canada, Puerto Rico, APO/AE, and U.S. Virgin Islands, however, an additional charge may be required. Please contact us before making any purchases in these areas. For Non-USA customers, you may be responsible for all duty, tax, & brokerage fees that may be due upon delivery (shipping costs cover freight charges only).We also ship internationally. Please refer to the "Shipping & Handling" chart for the rates for each area.
var seller = 'europeanbronze'; (function() { document.E = document['standard' + 'Write'] == null ? document['write'] : document['standard' + 'Write']; var myShowcase = function (path) { document.E(''); }; terapeak
(function(document, window, navigator) {var loc =(document.location), loc2 =loc.toString(), tempid='', myItemID='', chlen=0, ch;for (var i=0; i= '0' && ch= 11 && chlen '; document.write(str);})(document, window, navigator);>
inkFrog Analytics
Payment
We accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
ShippingWe offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
ReturnsIf you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
ShippingWe offer FREE shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
ReturnsIf you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Payment
We accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
ShippingWe offer Same day shipping on all orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
ReturnsIf you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Perfect ReputationFastShippingCustomer SupportBest OffersThank you for visiting our store!
Description
Condition: This sculpture is in perfect condition .
Bronze Dimensions with Marble Base:Height 14" x Width 6"
Marble Dimensions: 5" X 4 ".
Height without base: 13 "
Weight : 10 LBS
Inventory : 54B3837645
Artist: Edouard Drouot
Title:Roman Medium: Genuine Bronze - Lost Wax Process (Cire Perdue)
Height: 14"(As each sculpture is individually made, sizes stated are approximate. Measurements of most works are from the bottom of the marble base to the highest point of the sculpture.) and is signed Drouot
Weight:12 lbs
About the Sculpture: Made in the Europe. certified bronze! Featuring recasts of hundreds of significant bronzes. Setting the standard in hand cast bronzes in the superior Lost Wax Process (Cire Perdue). Clay to wax to bronze-the lost wax process is a method for changing a sculpture made of soft clay into a harder material such as bronze, which captures the most minute detail of the artists original work. Practicing in the same manner of the old world masters, with devotion to quality, fidelity and detail. Recasts may be made from originals, reproductions or sculptured after paintings. Our skillful artisans take pride in casting the best foundry bronze!
The Art of Lost Wax
Lost wax casting has been around for thousands of years, yet few people understand how the process actually works. Although mechanization has facilitated the lost wax process of bronze casting, the procedure is basically the same as that used by the Chinese when they first developed the process in the 2nd millennium BC.
The Rubber Mold
First the artist creates an original sculpture out of any number of media, including stone, wax, clay, wood and pottery. This image is coated with a silicone rubber molding material that makes two rubber mold halves (each rubber mold has a front and a back piece). A fiberglass outer shell is added to the back of each mold so it retains its shape and rigidity during subsequent uses. These molds are the only components that are ever re-used in the casting process. All other components are re-created for each casting.
The Wax Positive
Once the molds are done, the insides are coated with layers of wax. The halves are then bound together and wax poured inside to complete the wax image being created. Once the wax has cooled, the mold is peeled away, yielding a wax image (the wax positive") duplicating the original sculpture. This image must then be "touched -up" to remove any seam lines, scratches or other flaws, as well as to recreate any pattern or texturing that was lost or damaged when the wax was made. The quality of the finished bronze relies on a clean, high quality mold and an impeccably recreated wax image that is as near to perfect as possible.
Gating
The next step, "gating", is the application of a series of tubes and funnels that allow the molten bronze to flow through to the bottom of the ceramic shell and the hot gases to escape at the same time. These sprus are created by attaching wax rods to the finished wax form at strategically spaced locations.
Ceramic Shell Casting
After the gating is completed each wax form is dipped in a liquid ceramic silica-sand compound so it is completely coated inside and out. Holes called "patches" have been cut into the wax to allow an entrance to the inside of the form. The form is subsequently dipped 6 to 12 or more times over a period of several days until the desired shell thickness is achieved.
Lost Wax
Once these ceramic shells have dried thoroughly the pieces are placed into an autoclave and the wax is melted out (hence the term "lost wax"), to be reclaimed and used again. The shells are then cured in a kiln so they will withstand the temperature of the molten bronze being poured into them.
The Pour
Bronze ingots are melted to a temperature of approximately 2000°F and poured into the cured ceramic shells. As the sculpture cools the ceramic shell begins to pop away from the bronze. This shell will be completely broken away, using a hammer and chisel, before the superfluous metal materials are cut away.
Sandblasting
The casting is then sandblasted in preparation for metal finishing. Any pieces of a sculpture that were cast separately are welded back onto the sculpture and any seam lines or other imperfections are removed or "chased".
Texturing
Finally, any texturing that was lost or damaged in the casting or welding process is recreated. The sculpture is then polished in preparation for application of the patina.
Patinas
The different colored finishes that are possible on cast bronze sculptures are called patina's. The various colors, patterns and textures obtained in the patina process are achieved through a combined application of chemicals and heat, augmented by hand stippling, or spraying with an air brush, and sealed with lacquer and waxes.
Limited Editions
Most bronzes are part of a "limited edition" containing a fixed number of castings. This edition number is decided by the artist, usually after the first piece has been cast, and individually stamped on each piece (i.e. 1/100) thus concluding the process of bronze sculpture production. Payment And ShippingPayment Options
Payment for your purchase is expected within 10 days of the closing of the item's sale. Unpaid sale wins will be forfeited after 7 days.We accept Paypal and all Major Credit Cards (Visa, MasterCard, Discover, and American Express).
Additional Payment Information
If your payment is not received within this period, a non-payment claim will be filed. There is a 8.625% sales tax for New York residents.
Most of our items are shipped via USPS (United States Postal Service) mail or Fedex. Most orders are shipped within 24-48 hours of purchase. Please be aware that not all items are available for USPS shipping due to size and weight. We do ship to Hawaii, Alaska, Canada, Puerto Rico, APO/AE, and U.S. Virgin Islands, however, an additional charge may be required. Please contact us before making any purchases in these areas. For Non-USA customers, you may be responsible for all duty, tax, & brokerage fees that may be due upon delivery (shipping costs cover freight charges only).We also ship internationally. Please refer to the "Shipping & Handling" chart for the rates for each area.
var seller = 'europeanbronze'; (function() { document.E = document['standard' + 'Write'] == null ? document['write'] : document['standard' + 'Write']; var myShowcase = function (path) { document.E(''); }; terapeak
(function(document, window, navigator) {var loc =(document.location), loc2 =loc.toString(), tempid='', myItemID='', chlen=0, ch;for (var i=0; i= '0' && ch= 11 && chlen '; document.write(str);})(document, window, navigator);>
inkFrog Analytics
ANCIENT TIMES ROMAN LEGION SOLDIER JAVELIN SHIELD Sculpture Statue PURE Bronze:
$259.00