IGT S2000 Slot Machine Netplex Down error fix it repair kit for enhanced boards

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

IGT S2000 Slot Machine Netplex Down error fix it repair kit for enhanced boards:
$12.00

Is you IGT S2000 slot machine Flashing NetPlex Down or it works some times when you turn it on and some times its flashes the error NetPlex down if you are having any of these problems 1 or 2 of your batteries are failing my kit includes everything to repair it.
I have a up grade kit for you it contains 3 replacement parts 1 CR2354 battery, 1-14500 rechargeable battery, and 1 plastic battery holder and 1-#2341 reset key.
The 1st battery its a CR 2354 Lithium 3 volt button cell this is a non-rechargeable battery will be packaged differently then the one in the photoThe 2nd battery is a upgraded 14500(2200 mAh) 3.7 volt AA size rechargeable battery its a light gray battery not the blue battery in the photo the gray battery has discharge protection. a better battery than the blue one this battery replaces the green varta battery that causes your slot machine to stop working and gives the NetPlex error.The varta battery is a 3.6 volt rechargeable and is soldered on the board in 3 spots and this blue battery is the replacement for the varta you remove and solder the plastic battery holder in is place and it becomes and upgraded system because now no more soldering in these type of batteries you just pull out and replace with another 3.7 volt rechargeable battery.I use this Technic on all my S2000 slot machines that I fix and resell.
All this information here tells and shows you what you are replacing on your IGT board.The 1st 4 photos shows some of whats included in this order.The 5th photo is what a typicalenhancedS2000 board looks like.(Boards not included)The 6th photo shows where the CR 2354 battery should be installed.The 7th photo shows the green Varta Battery under a removable board it should have 6 screws but I have seen them with 0 to 4 screws installed on the board.The 8th photo shows the top board removed.The 9th photo shows the green battery before I removed it.The 10th photo shows the battery removed.The 11th photo shows the 2 wire leads for the plastic battery holder solder on red and black leads soldered in the correct spot.The 12 photo shows the board put back together with the replacement battery and plastic battery holder installed you can put it were ever you want this is just areference.
This circuit board I use is a nonworkingenhancedboard I just use it for show and tell.
INCLUDED:1-#2341 reset key(photo of key notavailable)
1-Black plastic AA solder on battery holder.
1- 3.7 Volt (BTBAI)Lite gray in color 2200 mAh rechargeable battery with discharge protection
1-Button cell CR 2354 Lithium 3 Volt removed from package and tested for proper voltage may lookdifferent than 1 in photo and tested voltage will be written on the battery after testing.
Complete battery up grade kit for IGT S2000 enhanced circuit boards