2-IGT SLOT MACHINE S2000 CPU BATTERY DROP IN CONVERSION KIT AND 2 MAXELL BATTERY

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

2-IGT SLOT MACHINE S2000 CPU BATTERY DROP IN CONVERSION KIT AND 2 MAXELL BATTERY:
$8.00

What I am selling here is 2 new battery conversion kits for the S2000 cpu removable board with this kit you can put a end to the solder in type battery that is used in this type of IGT cpu circuit board which can save you a lot of trouble when your batteries fail you just pull out the circuit board pop out the bad battery and insert and new 2032 or 2025 battery and if you are just changing the battery and if there are no other issues with the S2000 slot machine you don\'t need a set of reset eproms to change just the battery how every you do need the reset key to complete the reset because after you turn on the slot machine and it completes start up processes you will see a ram error you just need to turn the reset key to clear and do this each time you see the rest of the error messages until the machine shows a message stating you to push and hold the reset button on the cpu board and then close the door and the slot machine will be reset.
This battery conversion kit will replace the BR2330 that\'s installed on the board.you can only see 1 set but you get 2 sets see below. Whats included:2-band new black plastic solder in battery holders that work with the 2032 and the 2025 button batteries2-band new Maxell 2032 3 volt lithium batteries.
These sets can be used on other circuit boards that have a spacing of 3/4\" of and inch if you are not sure measure between the spacing of the battery installed on the circuit board. if you can\'t do it from the top try doing it on the bottom.
when you remove the solder type battery there are holes in the circuit board that you may not see if you don\'t use a solder sucker once you have inserted the battery holder in the holes you must complete your solder on the bottom(back side of the circuit board)to get a good connection please make sure that the positive side is installed correctly you can see by my photo\'s which way it goes
If you dont think you can change this yourself or are not willing to do the job I can do this for you for only $25.00 plus another 15.00 for the 2nd board if you purchase these from me the only draw back is you would need to send the circuit board to me and you must pay the shipping both ways the shipping charges and payment can be done through paypal.NOTE:THESE BATTERY HOLDERS WILL WORK ON THE IGT502\'sAND504\'sBOARDS,WILL NOT WORK ON THE ENHANCED BOARDS.
Important Please Read:
It has come to my attention that the some buyers are not marking the 5 star rating on the shipping times appropriately because I am receiving low rating on shipping times due to the Postal Services having slow shipping speeds because once the Postal Service has your package I have no more control on the speed of that package the Postal Service has 100% control on how fast you will receive your package through the mail not I so if you are leaving low 5 star ratings for any seller that has sent your package the same day or the next day and it shows that by the tracking number and that the Postal Service has received it then you should be giving that seller a 100% rating not anything less unless they have changed the way the package was shipped to a slower shipping service then less than 100% is OK but you do not count Holidays or week ends those days the Postal Service don\'t move or pickup mail.
I ship all my sold items the same day or the next day 100% of the time and the Postal service can be very slow at showing what the exact time and day it was picked up it could be 24 hours before it shows it has been picked up but and when it does it will show the correct day and it will be the day I mailed it out but as I write this the Postal Service they are far from being perfect and do make mistakes and once it a while packages are missed and not scanned in this could be caused by a new person working for the Postal Service and for other reasons but that\'s no reason to blame the seller because it has happen from time to time on packages that I sent out before but have been delivered quickly.
So when it comes time to leave your response always look at the everything the AD to see what there shipping days are set on if its 1 day shipping then check the tracking number when it was issued then compare it to the day it was shipped and then picked up by the Postal Service because if all that is with in the 1 day or 24 hour period of the sellers 1 day shipping on the ad then they should receive a 100% on the 5 star ratings because that seller has done what there ad states shipping times after the Postal Service has picked it up have nothing to do with the seller and the 5 star rating system the has.