IGT Slot Machine S-Plus Ram Clear and Bill Validator Setup chips

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

IGT Slot Machine S-Plus Ram Clear and Bill Validator Setup chips:
$12.99

THESE CAN BE USED ON 10 MHZ AND 16 MHZ IGT CPU BOARDS

2 NEW IGT S-PLUS CPU CLEAR AND BV SET UP CHIPS WITH INSTRUCTIONS.

THESE RESET CHIPS CAN BE USED IN 1988 TO 1999

SLOT MACHINES IF YOUR CPU BOARD IS THE SAME

INTHE 2ND PHOTO

These are new eproms (chips) with hand written Labels.

(IGT CPU BOARD NOT INCLUDEDREFERENCEONLY)

If you have a CODE-61 and it does not reset with reset key you are stuck in a 61 loop.

If you have a CODE-43 and the Reels are turning slow wont reset with the key.

CODE-12 low battery and you need to replace the Low battery or a dead battery.

Hopper wont payout the slot machine locks up makes a error sound reset key clearsit but error

returns as soon as you win or when you press the cash out button.

Other errors that wont go away even after you reset your slot machine with reset key.

All of these are signs that you need to do a Ram Clear repeated errors will not go away.

And when to clear the ram you also need to turn your bill validator back on and setup your

coin Denomination.

These 2 resete proms(chips) are the27C512 when using thesee proms

you do not need to move jumpers on your CPU motherboard,

If a seller is selling 27C256 E proms(chips) you need to change the jumper below the chips on the CPU motherboard

I don\'t sell thosee promsthey are no good.

If youown anIGT S-plus slot machine, you definitely need a set of these chipsin case you need to clear the ram-or at least restart the bill acceptor.

Also, there good to just have aroundin case and you will some day have to replace your CPU battery to clear your CPU to factory settings. The BV (Bill Validator or bill acceptor) chip is needed if you have one.

These two microchips workon S-PLUS machines: Upright and Slant Top slot machines

Like double diamond, red white blue, haywire, 5X pay and many other S-Plus slot machines that require a IVC123 clear chip

if you own anIGT Slot machine you will need these chips some time in the future.

Easy to use instructions:

insert chip in game chipsocket of cpu,power machine and push menu button, followINSTRUCTIONS -INCLUDED WITH CHIPS.Works on MOST IGT S-PLUS, new/old style boards, regardless of which style your using -(upright, slant, round top.)

NOTE: The BV chip will not upgrade bill validator to accept new currency.

chip must be replaced invalidator head.

You will receive a IVC123 clear chip and a SET15 BV

Please make sure these are the chips you need for your machine.

I got these chips surplus they are used and all are tested just before shipping the only reason they would not work in your slot

machine is if you install them backward or break a pin.

If you reset your slot machine and you can\'t get past the 61 contact me and I will tell you how to get past that it because there are

IGT S-Plus slot machines that require a extra step to complete the resetprocedure.

I know this because I am a slot machine repairtechnician and haveexperienced this issue before.

The tags on the chips will be replace and hand written because the originals clue did not hold and were falling off so I replaced them.

STEP BY STEP Simple to follow INSTRUCTIONS INCLUDED.

NOTE: care must be used when handling thesesensitive chips. If the Chips are installed backwards they will be destroyed!

If your not sure if you have an S+ MPU board look at the one in the Photo.

Your MPU board must look like the one in the photos!

I will accept returns if the eproms are not used or damaged from you installing them backward.

(Both of these are pre-tested before shipping guaranteed to work and fit your CPU board upon arrival)

(The arrows on the eproms are for you to know how to install them correctly there is a notch on every eprom and on all the eproms on the CPU board all have notches and or circles on 1 endthey all have some sort ofindicator on them so you can see they are all installed the same way (direction) so its impossible to install them backwards if you double check or triple check after installation of the 2 eproms before installing the cpu board back in the slot machine before turning on power because once you turn the power on if any eproms are backward then you just ruined 1 or all of them I don\'t warranty backward installs and bent pins or broken pinsif you installed any of them carelessly these are sensitive electronic parts and care must be taken when handling these eproms so be careful not to drop any of them.)