Star Wars Luke Skywalker ANH Light saber Vintage Graflex with Crystal Chamber

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Star Wars Luke Skywalker ANH Light saber Vintage Graflex with Crystal Chamber:
$760.00

The light saber shown in the above YouTube video is the actual item listed for sale.
This is a Vintage Graflex completely custom built Luke ANH Lightsaber with a 31\" LED strip blade. It features a CNC custom made Crystal Chamber. The chamber contains one large blue natural crystal with internal mist and fog to reflect bright accent LED lights. The chamber heat sink is CAD designed and CNC machined for a very precise shape and fit. The power capsule which contains two Li-Ion batteries, Plector Labs CF-LS V6.5 and 2W speaker is hand lathed. The 2W speaker cap is 3D printed. All wires are hidden for an extremely clean look. This is one of a kind collector item for any die hard Star Wars fan. This saber is designed for display, cosplay and some light dueling. The LED strip blade is quality built and every LED is soldered with extreme care. The saber is built with durability. In a previous test, it dueled with a Hasbro Force-FX ANH saber. The Hasbro ANH broke after some light dueling. However, this blade is primarily for display and cosplay, not intended for heavy dueling. This saber is about as screen accurate as it can be, plus more with a custom crystal chamber, sound banks and music player! The cost of parts in parts and material was about $800, not including tooling, CAD/CNC/3D print service and labor.
The parts cost break down:Vintage Graflex 3-cell flashgun(Skywalker ANH/ESB light saber hilt) $250 from ;Plector Labs CF-LS V6.5 top of line saber sound board $175;About 100pcs of 8mm OSB8131A, 2500MCD,5mm and 2mm colored LEDs $50TCSS Battle blade with bullet tip $30;TCSS Graflex blade adaptor $30;6061-T6 aluminium and brass billets, piping and tubing $150;Various micro switches, DIN plugs, resistors, 2W speaker, charger $50;Natural Aqua crystal point $30;Various detail hardwares such as T-track grips, bubble strip, D-ring $30
Complete Specs:
1. Vintage Graflex 3Cell flashgun Hilt. The same kind used in Star Wars \"A New Hope\" and \"The Empire Strikes Back\" by Luke Skywalker.
2. LED \"TCSS style\" Battle blade.1\" OD Thick wall modified for Led Strips. 8mm Blue LED X 69pcs - OSUB8131A,2500mcd. The LED strip contains11 pcs X 6 segments, and 3 pieces at the tip of the blade for a fuller tip. It totals about 69 pieces of 8mm LED. The most common custom LED strip blades on the market uses 5mm LEDs which requires about 96 pieces. This ANH saber uses 8mm LED strip which is far more brighter. It also runs about 50 minutes with music playing non-stop with two fully charged Li-Ion batteries. 5mm LED blades can only run about 20 minutes. This blade also works as a bar graph when you play a song. The blade has a DIN plug at the bottom. A black anodized 7075 aluminum DIN protective sleeve will be provided when the blade is not attached to the Graflex hilt. The blade looks much brighter in person than on the photos. My camera\'s auto setting tends to bring down the exposure due to the brightness of this blade. It hurts eyes if you look at the blade for too long. Be sure to check out the YouTube video for a more realistic brightness.
3. Plector LabsCrystal Focus LS V6.5 soundboard. This is the best LED strip light saber soundboard currently on the market. It has 6 sound banks and 1 music player function which you can play songs. It also drives the blade bar graph to match the song you\'re playing. See YouTube video for reference.
4. Custom hand lathed light up blade plug made from aluminum, brass and semi-translucent nylon.
5. Completely custom CAD designed and CNC machinedcrystal chamber with a genuine natural Aqua color crystal with inner fog and mist to reflect LED light. Very beautiful to look at!
6. Graflex 1\" Blade Adapter from The Custom Saber Shop. The most well known custom light saber online store.
7. Hand lathed 6061-T6 aluminum power capsule with accent red and blue LEDs.
8. Hand lathed power coil with copper wires.
9. Hand lathed brass crystal holder and DIN plug holder.
10. 2X14500 3.7V 1600mAh Li-Iron batteries. Please Note, the batteries will not be included in the final package due to the strict restriction from every courier and parcel company. Li-Ion batteries are not allowed to be shipped on a plane. A detailed diagram will be provided for the buyer to install Li-Ion batteries.
11. Universal 100v~240v smart charger with red/green LED indicator is included.
12. 6 pcs red 3mm LEDs[Accent LEDs#2,3,4,5,6,7]at the power coil position.
13. 1 white Accent LEDs behind the primary crystal for FOC(Flash on Crash) effect.

14. 2W TCSS bass speaker with custom 3D printed speaker cap.
15. Bubble strip from \" The Parts of Star Wars\"
16. Various TCSS accessories such as T-track grips and D-ring.
17. A hard shell storage case is also provided.
18. Custom made testing switch and kill key.
The item is located in Hong Kong. FREE SHIPPING TO WORLDWIDE VIA EMS(Express Mail Service from HK). Tracking and insurance will be provided. offer with confidence. No Returns, all sales final. Paypal Only.
Questions? Just ask.Some other information.
Youtube :Part-1 build logs :
8mm LED Strip blade build log