Stuart Steam Plant Live Steam Beam Engine D10 S50 BLR-1 BLR-2 Boiler PM Research

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Stuart Steam Plant Live Steam Beam Engine D10 S50 BLR-1 BLR-2 Boiler PM Research:
$8000.00

Please call with interest, I have many more pictures and videos of the engines running. Will also need to discuss REALISTIC SHIPPING cost and PACKAGING.
(909) 855 7853Yes ill consider splitting the plant up if the price is right. ---HORIZONTAL BOILER PLANT--- PM Research boiler BLR-2 and dynamo powered by a D10 of the 1990\'s. The Stuart D10 is equipped with every upgrade possible that i know of, running a dynamo which powers a vintage Lionel street lamp thats controlled with a vintage porcelain knife switch. There are 9 valves on this plant. Accessory blow down and other inlet for exhaust hook up when the beam isn\'t in use. Drain valve in the back of boiler, safety valve on the feed pump. Drain valve on the exhaust tank, shut off on the stack, exhaust close valve on the stack to force clean the tank if necessary, exhaust valve on the D10 so other engines exhaust dont inter the engine when its not in use. The D10 is fitted with oil cups, brass heat retainers, site class displacement lubricator, external feed pump, drain cocks, reversing gear and optional brass flywheel (larger flywheel currently in use) I have a few other sizes i run, all are included. Also a custom made drip pan. Boiler has been converted to gas as you can see so its safe and easy to run indoors and can adjust the temperature for boiler pressure. Mounted on 3/4 inch cherry. ---VERTICAL BOILER PLANT--- PM Research boiler BLR-1 which powers a S50 (not sure of its age but is older) and D10 of the 1970. I have made a custom base for the boiler and converted it to gas to allow the running of the boiler indoors and to easily control the boiler pressure. Drain valve in the back of boiler, safety valve on the feed pump. Drain valve on the exhaust tank, shut off on the stack, 2 exhaust close valves on the exhaust tank so the other engines exhaust doesnt inter the engine that isnt running and a blow down valve. A custom made drip pan for the D10 allows for easy cleaning. All are mounted on 3/4 inch cherry.---BEAM ENGINE--- VERY old Stuart beam engine said to be around the 1910\'s. Powers a dynamo which is controlled by a vintage porcelain knife switch. Lights up two pre war Lionel street lamps. Beam also has a water pump which pumps \"under ground\" water into the water tower. Hand made railing surrounds the beam. Engine runs very smooth and is shimmed with torqued bolts to allow for a quiet run. Sounds like a steam locomotive when running. VERY interesting to watch run. Mounted on a piece of 2 inch African Mahogany. Included in the last photo are new fittings of all sorts, some belts, bulbs, new nut and bolt kit for D10 and Beam, gaskets, oil, plumbing, valves, new site glass, new displacement lubricator, plans for both boilers, oil cups, flywheels, rods and so on. The three remaining boards are undrilled 3/4 cherry that i was going to put other engines on that i never could find. Gas tanks not included do to shipping restrictions. Gas tanks can be picked up at most sporting stores or walmart. Valves arnt part of the tanks so they do come with this sale.PLEASE CONTACT ME PRIOR TO PURCHASE TO TALK ABOUT HOW THEY WOULD BE SHIPPED AND OR DISSEMBLED??? They WILL be insured, tracked and need a signature conformation. Please ask any and all questions before purchase. These are old/antique \"toys\" that are used, SOLD AS IS no refunds. If necessary ill add to this listing as a contract/written agreement if needed for purchase. Thanks for looking and God bless.