The Kiss - Rodin Real Bronze Sculpture

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

The Kiss - Rodin Real Bronze Sculpture:
$199.00

High Quality Bronze Interpretation Of
Auguste Rodin\'s
\"The Kiss\"
Real Bronze

This is a reproduction of my favorite Rodin sculpture. It is cast in bronze using the traditional \"Lost Wax Process\" that dates back over a thousand years. Note that our traditional bronze is composed of 90% copper blended with tin and zinc. To keep this piece absolutely traditional, we use chemical patinas with high heat to achieve the rich deep color in the bronze. The application of patinas on metal is an art form in itself. The final step is waxing and buffing. The finished product is stunningly elegant, mounted on black marble with black velvet bottom.Size:13\" tall The marble base is 6\" x 5.5\" x 1\" . The weight is 10 pounds.
Auguste Rodin was born in 1840 and died in 1917. In his time he was considered the greatest sculptor since Michelangelo. His style was both classic and romantic. Rodin followed nature closely and presented it exactly as he saw it. It was he who led the way in modern sculpture. He never was awarded any national honors which was probably due to the fact that he lived during the years that his country was at war with Germany. In 1967 during the 50th anniversary of Rodin\'s death, he was finally awarded with public tribute to Preiss.

Special !
Call for discount and free shipping on additional items.To view more treasures Click here

How Is It Made ?
The \"Lost Wax\" Process

What gives bronze art value beyond that of a \"souvenir\" that ends up in a closet? There are many reasons including cost of materials (bronze, silicone for molds, tools, ovens, etc.) The main reason is there are very few people trained in the tedious process practiced by the ancient Greeks and Romans. Bronze sculpture is not easy to make and many time consuming, difficult steps are involved. In a world of hi-tech mass production, bronze casting remains essentially unchanged. Beware of \"cold cast\" or \"bonded bronze\", these are misleading names given to plastic figurines. Each of our genuine bronze castings is in reality an \"original\" and the following explains why. These are the basic steps involved in creating a bronze Sculpture using the classic \"cire perdue\" (lost wax) process:

• artist\'s original model
• silicone mold of the model
• create lost wax mold
• bronze casting
• clean mold from casting
• grind, rasp and file bronze
• assemble pieces by welding
• file and finish assembled piece
• polishing
• application of patinaAll bronze pieces are cast from a wax model regardless of the original material the model was sculpted. A silicone mold is made from the artist\'s finished piece, and a hollow wax cast is drawn from this mold. The wax is then repaired, re-worked and finished to the sculptor\'s specifications. Prior to creating a ceramic shell (explained below), vents are attached within the wax model. These vents are necessary in difficult areas where gas may accumulate such as hips, limbs, and neck. The vents allow the gas to escape when the molten bronze is poured and will prevent air pockets from forming and exploding the ceramic shell. The ceramic shell is one of the few materials the can withstand the heat of the molten metal.

When the wax cast is hardened and the vents are in place a ceramic shell is formed over the wax. This shell is made by dipping the wax into a slurry, coating it with sand, drying and repeating the process up to 14 times. A core consisting of plaster, ground brick and water is poured into the interior of the wax mold. After the ceramic shell and core have set, the mold is fired in an oven, the wax is melted and the ceramic shell is left intact. This process is known in French as \"cire perdue\" (lost wax). Molten bronze is now poured into the cavity left by the melted wax. When the bronze is cooled, the shell is chipped away using a hammer and chisel.

The bronze must now be repaired and finished. This step is called \"chasing\" and it is a difficult process because the metal is involved. Any imperfection such as air pockets of pits must be brazed with bronze rod, as in welding. All seams and spurs must be removed by grinding, rasping and, finally, sanding. The next step is to chase or hammer the vents from the mold using special tools. The natural bronze has a dull finish. after final finishing, a patina is applied which may be left matte of polished. Chemicals, pigments, heat, safety equipment and a lot of experience are involved. In addition, since bronze comes in a variety of alloys, the patina requires different chemicals and [phone removed by ]for credit cards or if you have any questions.