VINTAGE SANSUI 441 AM/FM STEREO RECEIVER VERY RARE IN THIS CONDITION

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

VINTAGE SANSUI 441 AM/FM STEREO RECEIVER VERY RARE IN THIS CONDITION:
$139.95

VINTAGE SANSUI 441 AM/FM STEREO RECEIVER VERY RARE IN THIS CONDITIONThis one owner unit has not been used for many years. We cleaned it up, fully tested it, and have enjoyed listening to it for several hours. Not a high power unit, it is nevertheless very clear and clean sounding, has good tuner sensitivity, and a very nice phono stage.Here is info from the blogspot stereonomono that includes the description from the original brochure:
Sansui 441IC-EquippedFM/AM Stereo Receiver
Sansui has asound policy on tonal quality. And there\'s no better introduction to Sansuihi-fi excellence than the modestly-priced 441. production costs of thisnewly-developed stereo receiver have been trimmed by a Sansui-developedconstruction techniquw called CBM(Circuit Board Module). This simplifies the use of high-density integratedcircuits and other electronic advances to maintain truly musical dynamics andclean tonal response. Despite its agreeable price, it features a hybrid ICamplifier delivering stable, low-distortion power to either or both connectedstereo speaker systems. Ics and MOS FET circuitry keep pinpoint FM/AM receptionnoise-free and sharp. Accurate tone controls a precise phono equalizer and allthe input/output facilities needed to handle your turntable, tape deck andauxiliary source components are included.
Here are the specs from Hi Fi Engine:
AM/FM Stereo Receiver (1974-76) Specifications

Tuning range: FM, MW

Power output: 11 watts per channel into 8Ω (stereo)

Frequency response: 25Hz to 30kHz

Total harmonic distortion: 1%

Damping factor: 20

Input sensitivity: 2.5mV (MM), 150mV (DIN), 150mV (line)

Signal to noise ratio: 70dB (MM), 80dB (line)

Channel separation: 45dB (MM), 45dB (line)

Output: 150mV (line), 30mV (DIN)

Speaker load impedance: 8Ω (minimum)

Semiconductors: 1 x FET, 7 x IC, 16 x transistors, 6 x diodes, 3 x zener diodes, 1 x LED

Dimensions: 424 x 135 x 285mm

Weight: 7.7kg

Year: 1974

Will be packed well to arrive safely. Shipping to the 48 contiguous states only. The shipping charge is nominal - it will actually cost us quite a bit more than that.