Water clear casting resin polyester 500gm with jewellery, plants leaves

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Water clear casting resin polyester 500gm with jewellery, plants leaves:
$17.00

The scope of application.
for casting jewelry, decor, jewelry, bulk installation, device 3D floors and so on. The resin has a very low viscosity even at room temperature. Allows large amounts of fill while reducing the amount of hardener. Long lifetime ensures degassing of which can speed up a little heated composition. Has the rare ability among epoxy resins - the possibility of evacuation for perfect casting. Excellent separated from acrylic formwork passing perfect glossy finish. Has no haze and seals in the filling, perfect directional light passes. Does not dissolve the ink jet printer (can be used to cover any printed labels). Excellent wets the surface.Important
Add accurately determined amount of the resin components and mix gently. Avoid vigorous stirring to reduce the amount of air in the resin. In special cases it may be recommended to preheat the product, and the product vacuum degassing.For systems which cure at room temperature post curing is recommended for rapid stabilization of the material and to achieve the best mechanical properties. During curing at elevated temperatures is recommended to avoid sharp jumps to temperatures exceeding 10 ° C per hour.
Set kitKit contains polyester resin and methyl ethyl ketone peroxide.3ml pipette for dosing hardener. Read cautions on individual containers. Keep out of reach of children.
Recommended
A few point to remember when using our LedStone Polyester Resin:All polyester resins have a VERY strong odor when curing. Always use in a well ventilated area.All polyester resins are very sticky and messy, we suggest using disposable plastic gloves when working with polyester resins.Clean up with acetone. Acetone can be found at any hardware store. (Acetone is very flammable, always follow the direction on the can).
Resins have a shelf life. We suggest storing the rein in a cool location and use within 6 months of purchase.Always use protective eyewear when mixing and using reins and plastic disposable gloves to protect your skin.response

We strive for excellent customer service on every order. Once you have received your product and you are satisfied with it, please leave positive response and we will do the same within minutes.Please DO NOT leave Neutral or Negative without contacting us first. We will do our best to fix the problem.
www.ledstone.lt