2PC For Toyota Tundra Corolla 4Runner Prius LED Fog Light Bulbs 6000K White 9006

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

2PC For Toyota Tundra Corolla 4Runner Prius LED Fog Light Bulbs 6000K White 9006:
$14.81

WELCOME TO MY STORE2x For Toyota Tundra Corolla 4Runner Prius LED Fog Light Bulbs 6000K White 9006Product Description9005 9006 Cree LED Foglight Bulbs 6000K Super White 50W 1500LMProduct Detail:Condition:NewCross Reference: 9005 /9006/ HB3 / H10 / 9140 / 9145 / 9040LED Chips: 8pcs Cree LED ChipsMaterial: Aluminum & High Temperature Resistant Quartz TubeLumens: 1500LM /PairPower: 50WBulbs Color: 6000K WhitePackage Included:2x 9005 /9006 LED BulbsThe LED Fog light is 40% Brighter,Broader than Original Halogen.Exclusive glass technology engineered around the CREE LED Chips to provide more uniform and concentrated lighting.Intelligent temperature control,0.1S Instant Start Up,Low power consumption.Natural Beam Pattern,A mass of clear white light with high penetration in the rain,foggy,dust days.Plug and play, easy to install;easy plug and play install.Sealed Housing:Dustproof and Waterproof.6000K White Clear Light Beam & 2 Side Beam.Strong Anti-interference performance.Optimized Cooling:Cold-pressed aluminum speed up the cooling rate to 30% ,ensure long lifespan.Little illuminated Surface,Comes with lens chips.super condenser.Uniform Light Spread,Powerful LEDs With 360°Light Beam
Install Caution1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Make sure to have the ignition turned off and the keys removed.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.NoteAfter installation, dust prevention measures must be done, LED lamp life depends on the cooling performance is good or bad. The lamp heat mainly active cooling (fan-cooling based, supplemented by the whole aviation aluminum heat dispassion ) as the main cooling method, the life of the fan in lamp bulb directly affects the life of LED lights.