High Strength Silicone RTV Mold Making Compound - Gallon - Yellow Fast Cure

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

High Strength Silicone RTV Mold Making Compound - Gallon - Yellow Fast Cure :
$112.99

Silicone Molding Compound Gallon Kit (9.8lbs)

(Click HERE for Instructions)10/1 ratio by weight

Silicone mold making materials are used extensively to create molds that will produce exactreplicas of life castings and other objects used in specialeffects, taxidermy, and craft making. Unlike some silicone\'s IES25 isnot inhibited (restrained or prevented from setting up) by latex or sulfur based products like oil based clay. Oursilicone mold making compounds consist of twocomponents. A liquid base and a catalyst or curing compound. All products are sold by weight.

Some of the materials you can cast into a silicone mold are:

Urethane Plastic
Urethane Rubber (sold in
Fiberglass Resign
Low melt metals (up to 400 degrees Max)
HydroCal White
UltraCal 30

Thixotropic Additive

TYPICAL PROPERTIES

Mix Ratio: 10/1 by weightBase
Color: white
Specific Gravity: 1.12
Viscosity (cPs) : 65,000
Weight: 2.2lbsCatalyst
Color: Yellow
Specific Gravity: 0.98
Viscosity (cPs): 100Mixed Viscosity 28000
Pot Life (pour time) 5-10 min.
After cure (3 hours @ 25°C)
Tensile, psi: 450
Elongation, % 375
Durometer, Shore A 25
Tear (die B) 60
Linear shrinkage;%: 0.3-0.4
Specific Gravity: 1.17

Return Policy: Customers are responsible for return shipping / customs fees.
Cash refunds will only be given if products are unopened and in original packaging.