VTG 30s 40s 50s SPARTON HORN 6V REBUILT WORKS FORD CHEVY OLDS DODGE ACCESSORY 4

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

VTG 30s 40s 50s SPARTON HORN 6V REBUILT WORKS FORD CHEVY OLDS DODGE ACCESSORY 4 :
$69.95

Hello, This is a VINTAGE SPARTON

CHEVY / FORD / DODGE / JEEP

AUTO TRUCK HORN

6 VOLT HORN

REFURBISHED

While your here, Please

Great Condition for it\'s Age, Use, & Storage.

This FITS CHEVY, GMC, DODGE, & Many Other Vehicles..

This can also be used on Any Car or Truck you decide.

I Dismantled the Horn, Cleaned itto check Condition. Looked Great.

There was some Pitting , Tiny Dents, & Bad Wiring.

I Cleaned it to Bare Metal & Primed before Repainting.

There was Little to No Rust. I used No Filler / Bondo on the Housing

There were a few Dents I Tried to Remove, able to remove Most of them.

There are a fewTiny ones & Pits that you can see when Looked at Closely.

I made repairs where needed, Cleaned the Contacts, & Adjusted the Horn.

I Rewired the Horn with 2 New Wires.

I Repainted the housing a Nice SEMI GLOSS BLACK.

I Polished all the hardware to Add some Extra Detail to the horn.

The Mounting Bracket is attached as Shown.

Looking at the Front, Bracket is on the RIGHT SIDE.

I havea Matching Horn, Bracket on the LEFT SIDE.

Rear Cover is Stamped : SPARTON C - 18

JACKSON, MICHIGAN

Made in U.S.A.

I PaintedMount Bracket the sameSemi Black also.

I TESTED with6 Volts, Works Great. .

This has the Classic BEEP BEEP Sound.

I tried to showthe Conditionin all the Pictures.

Size:

10\" Long, Trumpet 7\" Tall, 3 1/2\" Opening.

Rear Cover is APPROX. 5\" Wide.

Mounting Bracket Holes: 1 3/4\" Center to Center.

PACKAGEDCALCULATED at, 4 LBS.

Great Item to ADD to aDaily Driver.

ThisPieceis NOT PERFECT, Very Useable, Looks Pretty Good.

These are Getting Harder & Harder to Find in this Condition.

This is an SPARTON ITEM

JACKSON, MICHIGAN

Made in the U.S.A.

Part # C-18

Use on any HotRod RatRod Truck LowRiderDaily Driver Classic Cruiser Street Rod Period Resto or a Full Custom

LOOKat the Pictures, decide if this will work for you.

Think whatthis Hornmight Add to your Ride.

Thanks for LOOKING.

While your here,Please

Good Luck on your offerding.

Be sure to add me to your favorites list!

Check back often, always listing other KOOL items.

Never know what you\'ll find in my

Always Glad to Combine Shipping for Multiple Wins.

IF YOUR offerDING FROM OUTSIDE THE LOWER 48, CONTACT ME IF YOU NEED A SHIPPING QUOTE.

International Buyers – Please Note:

· Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer\'s responsibility.

· Please check with your country\'s customs office to determine what these additional costs will be prior to offerding/buying.

· These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.